Gene regulatory factors of the sea urchin embryo. II. Two dissimilar proteins, P3A1 and P3A2, bind to the same target sites that are required for early territorial gene expression

Previous work demonstrated that a negative regulatory interaction mediated by factor(s) termed 'P3A' is required for correct territory-specific gene expression in the sea urchin embryo. A probe derived from a P3A target site in the skeletogenic SM50 gene of Strongylocentrotus purpuratus was used to isolate a cDNA clone coding for a factor that binds specifically to this site. This factor, called P3A1, contains two sequence elements that belong to the Zn finger class of DNA-binding motifs, and in these regions is most closely similar to the Drosophila hunchback factor. The P3A1 factor also binds to a similar target sequence in a second gene, CyIIIa, expressed in embryonic aboral ectoderm. Another sea urchin embryo protein factor, P3A2, has been isolated by affinity chromatography and cloned, as described in Calzone et al. Development 112, 335-350 (1991). P3A2 footprints the same target sites in the SM50 and CyIIIa genes as does P3A1, but lacks the Zn finger sequence motifs and in amino acid sequence is almost entirely dissimilar to P3A1. A deletion analysis of P3A2 delimited the DNA-binding region, revealing that five specific amino acids in the first P3A1 finger region and four in the second P3A1 finger region are also present in equivalent positions in P3A2. The P3A1 and P3A2 factors could function as regulatory antagonists, having evolved similar target specificities from dissimilar DNA-binding domains

Precipitation Kinetics and Morphology of Grain Boundary Carbides in Ni-Base Superalloy Haynes 282

Precipitation of grain boundary carbides in a mill-annealed Haynes 282 in the temperature range 650 degrees C to 1120 degrees C was investigated. The kinetics of M(23)C(6)was significantly faster than that of M6C. With increasing aging temperature, the morphology changes from continuous film to an interconnected brick wall structure and finally to discrete particles. No morphological changes were observed with aging time. Serrated grain boundaries formed during aging around 750 degrees C. The solvus temperature for both M(23)C(6)and M6C was approximately 1100 degrees C

Survey of the pine wood nematode (PWN) Bursaphelenchus xylophilus in Norway 2003

In this survey of 2003, 600 samples were collected from 96 forest blocks in the counties of Aust-Agder and Vest-Agder in southern Norway. The sampling activity involved 19 municipalities situated mainly within the two zone sites D and E close to Kristiansand and Arendal. Samples from Scots pine (Pinus sylvestris) formed 92%, while samples of Norway spruce (Picea abies) made up 8% of the total sample volume. Timber and forest debris was the most common objects sampled. Ninety-eight percent of the samples, regardless of tree species, showed signs of Monochamus activity. Nematodes were common and occurred in 90% of the samples analysed. Eight samples of pinewood were positive for the genus Bursaphelenchus. This genus did not occur in spruce. Bursaphelenchus mucronatus was detected in 6 samples of forest debris of pine attacked by Monochamus and collected in the county of Aust-Agder. In the municipality of Evje and Hornes B. mucronatus was detected at Skjerkelia and Sutestad. In the municipality of Froland the nematode was found in two samples from Budalsfjellet, and in one sample from Mjålandsvatn. In the municipality of Birkenes one sample from Vågsdalen contained B. mucronatus. This is the fourth report on the occurrence of B. mucronatus in Norway. The pine wood nematode Bursaphelenchus xylophilus was not detected.Survey of the pine wood nematode (PWN) Bursaphelenchus xylophilus in Norway 2003publishedVersio

Survey of the pine wood nematode (PWN) Bursaphelenchus xylophilus in Norway 2002

In this survey of 2002, 600 samples were collected from 83 forest blocks in the counties Akershus, Buskerud, Oppland and Østfold. The sampling activity involved 16 municipallities situated mainly within the three zone sites A, B, and C. Samples from Scots pine (Pinus sylvestris) formed 89%, while samples of Norway spruce (Picea abies) made up 10% of the total sample volume. Timber and forest debris were the most common objects sampled. Sixty-five percent of the pine samples and 81% of the spruce samples showed signs of Monochamus activity. Nematodes were common and occurred in 94% of the samples analysed. Thirteen samples of pinewood were positive for the genus Bursaphelenchus. Bursaphelenchus mucronatus was recorded for the third time in Norway, and was detected in forest debris attacked by Monochamus at Bjørdalen in the municipality of Eidsberg in the county of Østfold. The pine wood nematode Bursaphelenchus xylophilus was not detected in this survey.Survey of the pine wood nematode (PWN) Bursaphelenchus xylophilus in Norway 2002publishedVersio

Precipitation of γ’ during cooling of nickel-base superalloy Haynes 282

Cooling-induced precipitation of the strengthening γ’ phase is commonly investigated in Ni-base superalloys with a high γ’ volume fraction, where it is used to control the final microstructure and properties. Less is known about the phase separation in low-volume-fraction alloys during cooling, although the microstructural state after cooling from solution treatment is known to affect subsequent heat-treatment steps. We use atomic-scale characterisation of Ni-base superalloy Haynes 282 (equilibrium γ’ volume fraction around 20%) to show that air cooling after solution or carbide stabilisation results in precipitation of nm-sized γ’ particles, whereas precipitation was suppressed during water quenching. The solution treatment has a significant effect on the hardness and γ’ precipitation during air cooling from the subsequent carbide stabilisation temperature. Also, the carbide-stabilisation treatment itself affects the γ’ precipitation during subsequent air cooling

The maintenance and monitoring of perioperative blood volume

The assessment and maintenance of perioperative blood volume is important because fluid therapy is a routine part of intraoperative care. In the past, patients undergoing major surgery were given large amounts of fluids because health-care providers were concerned about preoperative dehydration and intraoperative losses to a third space. In the last decade it has become clear that fluid therapy has to be more individualized. Because the exact determination of blood volume is not clinically possible at every timepoint, there have been different approaches to assess fluid requirements, such as goal-directed protocols guided by invasive and less invasive devices. This article focuses on laboratory volume determination, capillary dynamics, aspects of different fluids and how to clinically assess and monitor perioperative blood volume

A New Tool for Assessing Environmental Impacts of Altering Short-Term Flow and Water Level Regimes

The computational tool InSTHAn (indicators of short-term hydrological alteration) was developed to summarize data on subdaily stream flows or water levels into manageable, comprehensive and ecologically meaningful metrics, and to qualify and quantify their deviation from unaltered states. The pronunciation of the acronym refers to the recording interval of input data (i.e., instant). We compared InSTHAn with the tool COSH-Tool in a characterization of the subdaily flow variability of the Colorado River downstream from the Glen Canyon dam, and in an evaluation of the effects of the dam on this variability. Both tools captured the hydropeaking caused by a dam operation, but only InSTHAn quantified the alteration of key flow attributes, highlighting significant increases in the range of within-day flow variations and in their rates of change. This information is vital to evaluate the potential ecological consequences of the hydrological alteration, and whether they may be irreversible, making InSTHAn a key tool for river flow management

Phylogenetic and comparative gene expression analysis of barley (Hordeum vulgare) WRKY transcription factor family reveals putatively retained functions between monocots and dicots

WRKY proteins belong to the WRKY-GCM1 superfamily of zinc finger transcription factors that have been subject to a large plant-specific diversification. For the cereal crop barley (Hordeum vulgare), three different WRKY proteins have been characterized so far, as regulators in sucrose signaling, in pathogen defense, and in response to cold and drought, respectively. However, their phylogenetic relationship remained unresolved. In this study, we used the available sequence information to identify a minimum number of 45 barley WRKY transcription factor (HvWRKY) genes. According to their structural features the HvWRKY factors were classified into the previously defined polyphyletic WRKY subgroups 1 to 3. Furthermore, we could assign putative orthologs of the HvWRKY proteins in Arabidopsis and rice. While in most cases clades of orthologous proteins were formed within each group or subgroup, other clades were composed of paralogous proteins for the grasses and Arabidopsis only, which is indicative of specific gene radiation events. To gain insight into their putative functions, we examined expression profiles of WRKY genes from publicly available microarray data resources and found group specific expression patterns. While putative orthologs of the HvWRKY transcription factors have been inferred from phylogenetic sequence analysis, we performed a comparative expression analysis of WRKY genes in Arabidopsis and barley. Indeed, highly correlative expression profiles were found between some of the putative orthologs. HvWRKY genes have not only undergone radiation in monocot or dicot species, but exhibit evolutionary traits specific to grasses. HvWRKY proteins exhibited not only sequence similarities between orthologs with Arabidopsis, but also relatedness in their expression patterns. This correlative expression is indicative for a putative conserved function of related WRKY proteins in mono- and dicot species